Home

  Products

  Installation

  Request a Bid

  Architect Specs

  Radiant Heat Info

  Contact Us

  About Us

  FAQ

  Warmzone.com




FloorHeat


FloorHeat is a 9 or 12 inch wide polymer heating element used for in-floor radiant space heating, radiant floor heating, and roof de-icing. FloorHeat/RoofHeat can be installed under roofing and under most floor coverings including carpet, hardwood, tile and slate. FloorHeat's durability is also perfect for your remodeling/retrofit applications. Click here to find out about our low-voltage heating element




Install under hard wood flooring, carpet, tile, linoleum/vinyl, and marble.


Install under shingles, single-ply membrane, built-up, or metal.


FloorHeat / RoofHeat can be stapled and nailed right through for easy installation. In addition, surface buildup is not necessary with FloorHeat.




FloorHeat is a premier low-voltage product, has an extremely low profile and the ability to heat evenly. No other heating product can match its characteristics. Because FloorHeat is so thin, it will not affect your floor buildup, weight loads or flooring choices. FloorHeat can even be installed underneath the cement board when used to heat tile (which actually retains the heat longer when the system is turned off). No additional mortar or thin set is needed to cover the heating system because it is sandwiched in between the sub floor and cement board.


The FloorHeat heating system provides innovative methods for radiant heating. Utilizing state of the art components and low-voltage electricity, our products are virtually maintenance free, and are safe and efficient in operation. FloorHeat has a limited 25-year warranty and is engineered to provide simple and problem-free solutions.




Installation of FloorHeat under tile in kitchen

Photograph of completed kitchen project




FloorHeat installed on plywood subfloor with minimum 1/8" underlayment required between Zmesh and carpet padding


FloorHeat installed on concrete substrate - Carpet and padding can be installed directly over FloorHeat

POWER REQUIREMENTS

  • FloorHeat systems heating a 21 to 300 sq. ft. area require a 240 v. 20 amp breaker

  • FloorHeat systems heating a 300 to 740 sq. ft. area require a 240 v. 30 amp breaker

  • Heat cable systems heating a 15 to 110 sq. ft. area require a 120 v. 20 amp breaker

  • Heat cable systems heating a 111 to 200 sq. ft. area require a 240 v. 20 amp breaker

  • Heat cable systems heating a 200 to 485 sq. ft. area require a 240 v. 30 amp breaker
    		•